Effect of Intercriticle Annealing on Impact Energy and Hardness of AISI 1026steel

Siluveru Ramakrishna; Bharath Karthik Venkatesh; Katakam Mahesh; S. Rajesham

doi:doi:10.11648/j.ijmea.20190706.11

| Peer-Reviewed

Effect of Intercriticle Annealing on Impact Energy and Hardness of AISI 1026steel

Siluveru Ramakrishna, Bharath Karthik Venkatesh, Katakam Mahesh, S. Rajesham

Published in International Journal of Mechanical Engineering and Applications (Volume 7, Issue 6)

Received: 3 April 2019 Accepted: 26 June 2019 Published: 27 November 2019

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

In the advanced planning world, expansive research has incited the improvement of some phenomenal dimensions of steel, every now and again fitting for overhauled limits. Medium carbon steel AISI 1026 is one such assessment, having huge applications in power plants, vehicle and diverse current applications. Diverse warmth treatment forms are utilized to accomplish high hardness and durability, however machinability consequently diminishes. Existing writing isn't adequate to accomplish a harmony among hardness and machinability. The point of this exploratory work is to decide the hardness esteems and durability changes in AISI 1026 steel, when it is exposed to Annealing saw that high toughness value (impact energy) and moderate hardness. Annealed samples oppressed Intercriticle annealing process that implies heated upto upper critical temperature and water quenched. It is seen that the Intercriticle Annealing (ICA) of the specimens after annealing process achieved better results as compared to as received material AISI 1026steel.

Published in	International Journal of Mechanical Engineering and Applications (Volume 7, Issue 6)
DOI	10.11648/j.ijmea.20190706.11
Page(s)	131-135
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2019. Published by Science Publishing Group

Keywords

Heat Treatment, Mechanical Properties, Hardness, Toughness, Intercriticle Annealing

References

[1]	Anmol Singh, Amit Sharma, Ashish Kumar. “To analyze effect of heat treatment on properties of steel specimen before welding and after welding” International Journal of Engineering Science Invention Research & Development e-ISSN: 2349-6185.
[2]	Rajesh Jha, Siddharth Ranjan, Rakesh Kumar. “Investigation of Heat Treatment on Mechanical Properties of Mild Steel” An International Journal of Engineering Sciences, Special Issue November 2017 (ETME-17).
[3]	Ahaneku, I., A. Kamal, and O. Ogunjirin. "Effects of Heat Treatment on the Properties of Mild Steel Using Different Quenchants." Frontiers in Science 2. 6 (2012): 153-158.
[4]	Adebayo, Adeyinka, Joseph Temitope Stephen, and Gbenga Joshua Adeyemi. "Effects of Local Cooling Media on the Mechanical Properties of Heat Treated Mild Steel." European Journal of Engineering Research and Science 3.4 (2018): 27-31.
[5]	Tanwer, Amit Kumar. "Effect of various heat treatment processes on mechanical properties of mild steel and stainless steel." American International Journal of Research in Science, Technology, Engineering & Mathematics 8.1 (2014): 57-61.
[6]	Hasan MF. “Analysis of Mechanical Behavior and Microstructural Characteristics Change of ASTM A-36 Steel Applying Various HeatTreatment” J Material Sci EngISSN: 2169-0022 JME.
[7]	Biswas, Palash, Arnab Kundu, and Dhiraj Mondal. "An Experimental Investigation on Hardness and Microstructure of Heat Treated EN 9 Steel." IOP Conference Series: Materials Science and Engineering. Vol. 225. No. 1. IOP Publishing, 2017.
[8]	O. R Adetunji, A. O Adegbola, S. A Afolalu. “Comparative study of case-hardening and water-quenching of mild steel rod on its mechanical properties” International Journal of Advance Research, June 2015, Online: ISSN 2320-9135.
[9]	Tukur, S. A., et al. "Effect of Heat treatmen t temperature on mechanical properties of the AISI 304 stainless steel." Intl J Innov Res Sci, Eng Technol 3 (2014): 9516-9520.
[10]	Adetunji, Olajide R., A. O. Adegbola, and Sunday A. Afolalu. "Comparative study of case-hardening and water-quenching of mild steel rod on its mechanical properties." International Journal of Advance Research, IJOAR. org 3.6 (2015): 1-9.
[11]	Avner S. H., 1974. “Introduction to Physical Metallurgy”. McGraw Hill, PP 305-313. Bartel G. E., 2006. “Steel Heat Treatment: Metallurgy and Technologies”. CRC Press: Boca Raton, F. L. 209.

Cite This Article

Plain Text BibTeX RIS

APA Style

Siluveru Ramakrishna, Bharath Karthik Venkatesh, Katakam Mahesh, S. Rajesham. (2019). Effect of Intercriticle Annealing on Impact Energy and Hardness of AISI 1026steel. International Journal of Mechanical Engineering and Applications, 7(6), 131-135. https://doi.org/10.11648/j.ijmea.20190706.11

Copy | Download

ACS Style

Siluveru Ramakrishna; Bharath Karthik Venkatesh; Katakam Mahesh; S. Rajesham. Effect of Intercriticle Annealing on Impact Energy and Hardness of AISI 1026steel. Int. J. Mech. Eng. Appl. 2019, 7(6), 131-135. doi: 10.11648/j.ijmea.20190706.11

Copy | Download

AMA Style

Siluveru Ramakrishna, Bharath Karthik Venkatesh, Katakam Mahesh, S. Rajesham. Effect of Intercriticle Annealing on Impact Energy and Hardness of AISI 1026steel. Int J Mech Eng Appl. 2019;7(6):131-135. doi: 10.11648/j.ijmea.20190706.11

Copy | Download

@article{10.11648/j.ijmea.20190706.11,
  author = {Siluveru Ramakrishna and Bharath Karthik Venkatesh and Katakam Mahesh and S. Rajesham},
  title = {Effect of Intercriticle Annealing on Impact Energy and Hardness of AISI 1026steel},
  journal = {International Journal of Mechanical Engineering and Applications},
  volume = {7},
  number = {6},
  pages = {131-135},
  doi = {10.11648/j.ijmea.20190706.11},
  url = {https://doi.org/10.11648/j.ijmea.20190706.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.20190706.11},
  abstract = {In the advanced planning world, expansive research has incited the improvement of some phenomenal dimensions of steel, every now and again fitting for overhauled limits. Medium carbon steel AISI 1026 is one such assessment, having huge applications in power plants, vehicle and diverse current applications. Diverse warmth treatment forms are utilized to accomplish high hardness and durability, however machinability consequently diminishes. Existing writing isn't adequate to accomplish a harmony among hardness and machinability. The point of this exploratory work is to decide the hardness esteems and durability changes in AISI 1026 steel, when it is exposed to Annealing saw that high toughness value (impact energy) and moderate hardness. Annealed samples oppressed Intercriticle annealing process that implies heated upto upper critical temperature and water quenched. It is seen that the Intercriticle Annealing (ICA) of the specimens after annealing process achieved better results as compared to as received material AISI 1026steel.},
 year = {2019}
}

Copy | Download

TY  - JOUR
T1  - Effect of Intercriticle Annealing on Impact Energy and Hardness of AISI 1026steel
AU  - Siluveru Ramakrishna
AU  - Bharath Karthik Venkatesh
AU  - Katakam Mahesh
AU  - S. Rajesham
Y1  - 2019/11/27
PY  - 2019
N1  - https://doi.org/10.11648/j.ijmea.20190706.11
DO  - 10.11648/j.ijmea.20190706.11
T2  - International Journal of Mechanical Engineering and Applications
JF  - International Journal of Mechanical Engineering and Applications
JO  - International Journal of Mechanical Engineering and Applications
SP  - 131
EP  - 135
PB  - Science Publishing Group
SN  - 2330-0248
UR  - https://doi.org/10.11648/j.ijmea.20190706.11
AB  - In the advanced planning world, expansive research has incited the improvement of some phenomenal dimensions of steel, every now and again fitting for overhauled limits. Medium carbon steel AISI 1026 is one such assessment, having huge applications in power plants, vehicle and diverse current applications. Diverse warmth treatment forms are utilized to accomplish high hardness and durability, however machinability consequently diminishes. Existing writing isn't adequate to accomplish a harmony among hardness and machinability. The point of this exploratory work is to decide the hardness esteems and durability changes in AISI 1026 steel, when it is exposed to Annealing saw that high toughness value (impact energy) and moderate hardness. Annealed samples oppressed Intercriticle annealing process that implies heated upto upper critical temperature and water quenched. It is seen that the Intercriticle Annealing (ICA) of the specimens after annealing process achieved better results as compared to as received material AISI 1026steel.
VL  - 7
IS  - 6
ER  -

Copy | Download

Author Information

Siluveru Ramakrishna

Department of Mechanical Engineering, Balaji Institute of Technology and Science, Narsampet, Telangana, India
Bharath Karthik Venkatesh

Department of Mechanical Engineering, Balaji Institute of Technology and Science, Narsampet, Telangana, India
Katakam Mahesh

Department of Mechanical Engineering, RGUKT (IIIT), Basar, Telangana, India
S. Rajesham

Department of Mechanical Engineering, RGUKT (IIIT), Basar, Telangana, India

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Siluveru Ramakrishna, Bharath Karthik Venkatesh, Katakam Mahesh, S. Rajesham. (2019). Effect of Intercriticle Annealing on Impact Energy and Hardness of AISI 1026steel. International Journal of Mechanical Engineering and Applications, 7(6), 131-135. https://doi.org/10.11648/j.ijmea.20190706.11

Copy | Download

ACS Style

Siluveru Ramakrishna; Bharath Karthik Venkatesh; Katakam Mahesh; S. Rajesham. Effect of Intercriticle Annealing on Impact Energy and Hardness of AISI 1026steel. Int. J. Mech. Eng. Appl. 2019, 7(6), 131-135. doi: 10.11648/j.ijmea.20190706.11

Copy | Download

AMA Style

Siluveru Ramakrishna, Bharath Karthik Venkatesh, Katakam Mahesh, S. Rajesham. Effect of Intercriticle Annealing on Impact Energy and Hardness of AISI 1026steel. Int J Mech Eng Appl. 2019;7(6):131-135. doi: 10.11648/j.ijmea.20190706.11

Copy | Download

@article{10.11648/j.ijmea.20190706.11,
  author = {Siluveru Ramakrishna and Bharath Karthik Venkatesh and Katakam Mahesh and S. Rajesham},
  title = {Effect of Intercriticle Annealing on Impact Energy and Hardness of AISI 1026steel},
  journal = {International Journal of Mechanical Engineering and Applications},
  volume = {7},
  number = {6},
  pages = {131-135},
  doi = {10.11648/j.ijmea.20190706.11},
  url = {https://doi.org/10.11648/j.ijmea.20190706.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.20190706.11},
  abstract = {In the advanced planning world, expansive research has incited the improvement of some phenomenal dimensions of steel, every now and again fitting for overhauled limits. Medium carbon steel AISI 1026 is one such assessment, having huge applications in power plants, vehicle and diverse current applications. Diverse warmth treatment forms are utilized to accomplish high hardness and durability, however machinability consequently diminishes. Existing writing isn't adequate to accomplish a harmony among hardness and machinability. The point of this exploratory work is to decide the hardness esteems and durability changes in AISI 1026 steel, when it is exposed to Annealing saw that high toughness value (impact energy) and moderate hardness. Annealed samples oppressed Intercriticle annealing process that implies heated upto upper critical temperature and water quenched. It is seen that the Intercriticle Annealing (ICA) of the specimens after annealing process achieved better results as compared to as received material AISI 1026steel.},
 year = {2019}
}

Copy | Download

TY  - JOUR
T1  - Effect of Intercriticle Annealing on Impact Energy and Hardness of AISI 1026steel
AU  - Siluveru Ramakrishna
AU  - Bharath Karthik Venkatesh
AU  - Katakam Mahesh
AU  - S. Rajesham
Y1  - 2019/11/27
PY  - 2019
N1  - https://doi.org/10.11648/j.ijmea.20190706.11
DO  - 10.11648/j.ijmea.20190706.11
T2  - International Journal of Mechanical Engineering and Applications
JF  - International Journal of Mechanical Engineering and Applications
JO  - International Journal of Mechanical Engineering and Applications
SP  - 131
EP  - 135
PB  - Science Publishing Group
SN  - 2330-0248
UR  - https://doi.org/10.11648/j.ijmea.20190706.11
AB  - In the advanced planning world, expansive research has incited the improvement of some phenomenal dimensions of steel, every now and again fitting for overhauled limits. Medium carbon steel AISI 1026 is one such assessment, having huge applications in power plants, vehicle and diverse current applications. Diverse warmth treatment forms are utilized to accomplish high hardness and durability, however machinability consequently diminishes. Existing writing isn't adequate to accomplish a harmony among hardness and machinability. The point of this exploratory work is to decide the hardness esteems and durability changes in AISI 1026 steel, when it is exposed to Annealing saw that high toughness value (impact energy) and moderate hardness. Annealed samples oppressed Intercriticle annealing process that implies heated upto upper critical temperature and water quenched. It is seen that the Intercriticle Annealing (ICA) of the specimens after annealing process achieved better results as compared to as received material AISI 1026steel.
VL  - 7
IS  - 6
ER  -

Copy | Download