Cumene oxidation with 1-methyl-1-phenylethyl hydroperoxide catalyzed by N-hydroxyphthalimide or its derivatives and transition metal salts has been studied. Effects of the type of metal compound (Co(II), Mn(II) or Cu(II) chloride, acetate or acetylacetonate), amounts of N-hydroxyphthalimide and metal salt as well as temperature were established. The highest yields of dicumyl peroxide (48-54%) were obtained, when reaction was performed at 60-70°C, in the presence of the NHPI/CuCl2 catalytic system, in acetonitrile as a solvent. Similar yield of dicumyl peroxide (43%) was obtained in solvent-free medium.
Published in | Modern Chemistry (Volume 5, Issue 2) |
DOI | 10.11648/j.mc.20170502.12 |
Page(s) | 29-34 |
Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
Copyright |
Copyright © The Author(s), 2017. Published by Science Publishing Group |
Oxidation, N-Hydroxyphthalimide, Cumene Hydroperoxide, Dicumyl Peroxide, Cumene, Copper(II) Chloride
[1] | Kirk- Othmer Encyclopedia of Chemical Technology Vol. 18, Wiley, New York, 1990. |
[2] | M. S. Kharasch, A. Fono, “New Metal Salt-Induced Homolytic Reactions. 2. Modification Of Free Radical Reactions By Copper Salts”, J. Org. Chem. 1959, 24, 72-78. |
[3] | J. Kochi, “The Mechanism of the Copper Salt Catalysed Reactions of Peroxides”, Tetrahedron, 1962, 18, 483-497. |
[4] | J. Zawadiak, D. Gilner, “Synthesis of t-Butyl-Cumyl Peroxide from t-Butyl Hydroperoxide and Cumene in the Presence of Cupric Chloride/Tetrabutylammonium Bromide Catalytic System”, Pol. J. Applied Chem., 1995, 39, 225-232. |
[5] | J. Zawadiak, D. Gilner, R. Mazurkiewicz, “Copper salt - crown ether systems as catalysts for the oxidation of cumene with 1-methyl-1-phenylethylhydroperoxide to bis(1-methyl-1-phenylethyl)peroxide”, Tetrahedron Letters, 1999, 40(21), 4059-4062. |
[6] | J. Zawadiak, D. Gilner, R. Mazurkiewicz, B. Orlinska, “Copper Salt-Crown Ether System as Catalysts for the Oxidation of Isopropyl Arenes with Tertiary Hydroperoxides to Peroxides”, Appl Catal A General, 2001, 205, 239-243. |
[7] | G. Rothenberg, L. Feldberg, H. Wiener, Y. Sasson, “Copper-Catalyzed Homolytic and Heterolytic Benzylic and Allylic Oxidation using tert-Butyl Hydroperoxide”, J. Chem. Soc., Perkin Trans, 1998, 2, 2429–2434. |
[8] | J. Zawadiak, Z. Stec, Z. Kulicki, A. Burghardt, B.Staniowski, G. Jóźwicki G. Stolarczyk, “The method of tertiary aralkyl peroxides production”, PL 156 813, 1992; “The method of dicumyl peroxide production from cumene and cumene hydroperoxide” PL 156 814, 1992; BR 88 06 302, 1989; BR 89 06 394, 1990; BR 89 06 395, 1990. |
[9] | F. Recupero, C. Punta, Free Radical Functionalization of Organic Compounds Catalyzed by N-Hydroxyphthalimid”, Chem. Rev. 2007, 107, 3800-3842. |
[10] | K. Chen, P. Zhang, Y. Wang, H. Lin, “ Metal-free allylic/ benzylic oxidation strategies with molecular oxygen: recnt advances and future prospects”, Green Chem. 2014, 16, 2344-2374. |
[11] | S. Coseri, “Phthalimide‐N‐oxyl (PINO) Radical, a Powerful Catalytic Agent: Its Generation and Versatility Towards Various Organic Substrates”, Catal. Rev.-Sci. Eng., 2009, 51, 218-292. |
[12] | R. Amorati, M. Lucarini, V. Mugnaini, G. Pedulli, F. Minisci, F. Recupero, F. Fontana, P. Astolfi, L. Greci, „Hydroxylamines as Oxidation Catalysts: Thermochemical and Kinetic Studies”, J. Org. Chem., 2013, 68, 1747-1754. |
[13] | J. Zawadiak, D. Gilner, Z. Kulicki, S. Baj, “Concurrent Iodimetric Determination of Cumene Hydroperoxide and Dicumenyl Peroxide Used for Reaction Control in Dicumenyl Peroxide Synthesis”, Analyst, 1993, 118, 1081-1083. |
[14] | K. Kasperczyk, B. Orlińska, J. Zawadiak, " Aerobic Oxidation of Cumene Catalysed by 4-Alkyloxycarbonyl- N-Hydroxyphthalimide”, Cent. Eur. J. Chem. 2014, 12, 1176-1182. |
[15] | Basudeb Saha, Nobuyoshi Koshino, James H. Espenson, "N-Hydroxyphthalimides and Metal Cocatalysts for the Autoxidation of p-Xylene to Terephthalic Acid”, J. Phys. Chem. A 2004, 108, 1176-431. |
[16] | N. Koshino, B. Saha, J. H. Espenson, „Kinetic Study of the Phthalimide N-Oxyl Radical in Acetic Acid. Hydrogen Abstraction from Substituted Toluenes, Benzaldehydes, and Benzyl Alcohols”, J. Org. Chem. 2003, 68, 9364-9370. |
[17] | N. Sawatari, S. Sakaguchi, Y. Ishii, „Oxidation of nitrotoluenes with air using N-hydroxyphthalimide analogues as key catalysts”, Tetrahedron Lett., 2003, 44, 2053-2056. |
[18] | K. V. Novikova, M. O. Kompanets, O. V. Kushch, S. P. Kobzev, M. M. Khliestov, I. O. Opeida, “Substituted N-hydroxyphthalimides as oxidation catalysts”, Reac. Kinet. Mech. Cat., 2011, 103, 31–40. |
APA Style
Aleksandra Konopińska, Beata Orlińska, Danuta Gillner. (2017). N-Hydroxyphthalimide as a Catalyst of Cumene Oxidation with Hydroperoxide. Modern Chemistry, 5(2), 29-34. https://doi.org/10.11648/j.mc.20170502.12
ACS Style
Aleksandra Konopińska; Beata Orlińska; Danuta Gillner. N-Hydroxyphthalimide as a Catalyst of Cumene Oxidation with Hydroperoxide. Mod. Chem. 2017, 5(2), 29-34. doi: 10.11648/j.mc.20170502.12
AMA Style
Aleksandra Konopińska, Beata Orlińska, Danuta Gillner. N-Hydroxyphthalimide as a Catalyst of Cumene Oxidation with Hydroperoxide. Mod Chem. 2017;5(2):29-34. doi: 10.11648/j.mc.20170502.12
@article{10.11648/j.mc.20170502.12, author = {Aleksandra Konopińska and Beata Orlińska and Danuta Gillner}, title = {N-Hydroxyphthalimide as a Catalyst of Cumene Oxidation with Hydroperoxide}, journal = {Modern Chemistry}, volume = {5}, number = {2}, pages = {29-34}, doi = {10.11648/j.mc.20170502.12}, url = {https://doi.org/10.11648/j.mc.20170502.12}, eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.mc.20170502.12}, abstract = {Cumene oxidation with 1-methyl-1-phenylethyl hydroperoxide catalyzed by N-hydroxyphthalimide or its derivatives and transition metal salts has been studied. Effects of the type of metal compound (Co(II), Mn(II) or Cu(II) chloride, acetate or acetylacetonate), amounts of N-hydroxyphthalimide and metal salt as well as temperature were established. The highest yields of dicumyl peroxide (48-54%) were obtained, when reaction was performed at 60-70°C, in the presence of the NHPI/CuCl2 catalytic system, in acetonitrile as a solvent. Similar yield of dicumyl peroxide (43%) was obtained in solvent-free medium.}, year = {2017} }
TY - JOUR T1 - N-Hydroxyphthalimide as a Catalyst of Cumene Oxidation with Hydroperoxide AU - Aleksandra Konopińska AU - Beata Orlińska AU - Danuta Gillner Y1 - 2017/05/04 PY - 2017 N1 - https://doi.org/10.11648/j.mc.20170502.12 DO - 10.11648/j.mc.20170502.12 T2 - Modern Chemistry JF - Modern Chemistry JO - Modern Chemistry SP - 29 EP - 34 PB - Science Publishing Group SN - 2329-180X UR - https://doi.org/10.11648/j.mc.20170502.12 AB - Cumene oxidation with 1-methyl-1-phenylethyl hydroperoxide catalyzed by N-hydroxyphthalimide or its derivatives and transition metal salts has been studied. Effects of the type of metal compound (Co(II), Mn(II) or Cu(II) chloride, acetate or acetylacetonate), amounts of N-hydroxyphthalimide and metal salt as well as temperature were established. The highest yields of dicumyl peroxide (48-54%) were obtained, when reaction was performed at 60-70°C, in the presence of the NHPI/CuCl2 catalytic system, in acetonitrile as a solvent. Similar yield of dicumyl peroxide (43%) was obtained in solvent-free medium. VL - 5 IS - 2 ER -